The fixed unloading platform is a special auxiliary equipment for fast loading and unloading of goods. Its height adjustment function is used to build a bridge between trucks with no goods in the warehouse. It can directly enter the car to load and unload goods in bulk. A single operation enables fast loading and unloading of cargo.
Recommended reading: What to do if the rail type lifting platform cannot rise?
* Longzhu Machinery can customize machines of different sizes and sizes according to the different needs of users.
1. Except for electrical professionals, no one may disassemble electrical appliances at will to prevent electric shock or wiring errors.
2. When working on the platform, hands, feet and clothes should be prevented from being squeezed.
3. After lifting the platform, if you need to stay for a period of time or check under the workbench, you must use a bracket to prevent the table from suddenly falling down.
4. Do not adjust the overflow valve at will. Hydraulic components in hydraulic systems work under regulated pressure. When the pressure is too high and the relief valve does not open, the workbench may suddenly fall, causing damage to personnel, machinery and property.
5. Before disassembling any part of the hydraulic system, you must first remove the pressure to avoid the pressured oil spray, which will cause the table to fall and hurt.
1. When the equipment is used for about 2 months (according to the actual frequency of use), grease must be added to the rotating parts;
2. Regularly check the working status of the needle every month. If the pin and screw are found to be loose, tighten the shaft to prevent the pin and screw from falling off, causing an accident.
3. The hydraulic oil should be kept clean and replaced every 6 months;
4. When maintaining and cleaning the lifting platform, be sure to raise the seat belt.
The whole machine is guaranteed for one year. Only necessary travel expenses, time and spare parts are charged during the warranty period.
Recommended reading: What is the effect of setting up a wall piece on an aerial work platform?