The function of the fixed lifting platform is to facilitate the forklift to and from the cargo storage place and the truck compartment to improve the efficiency of transportation. However, the fixed lifting platform must be firmly fixed during use, otherwise it is very easy to cause accidents. Next, we will explain the construction of fixed pit pits.
The pit of the fixed lifting platform is generally at the entrance of the factory, warehouse, and other logistics. This series of products are relatively short in height, low in lifting height, and low in pit depth requirements. It is mainly flat inside the pit for easy fixing. The required pits for the fixed scissor lift platform and guide rail fixed lift platform are relatively high. Both series of products belong to aerial work, with high lifting height and heavy weight. Therefore, the construction of the pit has a lot to do with the stability and safety of the whole machine. The pit is usually constructed in advance by the client. The depth of the pit is consistent with the height of the lifting platform itself, and the length and width are about 10cm more than the equipment. Fix four embedded iron pieces with concrete. The purpose of reserving the embedded iron parts is to talk about the equipment and iron parts welded together to increase the reliability of the whole machine.
If the pit is not constructed properly, the lifting platform cannot be fixed horizontally, causing the center of gravity to be skewed during the cargo security and lifting process, the equipment is unevenly stressed, and it is easy to damage one side or part of the connecting components and struts, and the service life is naturally reduced . The main thing is to bury a lot of security risks. If the pit is reasonable and the level is slightly biased, the installer can perform leveling treatment before the equipment is installed. If there are more problems, the installer should ask to dig the pit again. Second, after fixing, the installer needs to carefully determine whether the equipment is fully level. It can be tested and leveled on the ground and multiple levels to ensure the safety of use.
Summary: In any case, safety always comes first, and the most important concern. The construction of pits is even more careless. Only when we build it firmly can the safety performance of the fixed lifting platform be improved.